NEW LANDLE TECHNOLOGY CO.,LTD
NEWLANDLE TECHNOLOGY CO.,LTD Professional Industrial Grade Drone Supplier
Add to Cart
X8 Brushless Motor Power System for Agriculture UAV Drone Load 5~7kgs Up to 15.3kgs Waterproof Dustproof IPX7
Advanced Parameters
| Voltage(V) | Propeller | Throttle(%) | Thrust | Ampere(A) | Power(W) | Efficiency(g/W) |
| 48V(12S LIPO) | 30.5 Inch Foldable Propeller | 44% | 3012 | 3.5 | 231.1 | 13.0 |
| 51% | 4009 | 7.1 | 346.9 | 11.6 | ||
| 56% | 5032 | 9.6 | 471.6 | 10.7 | ||
| 60% | 6000 | 12.6 | 615.0 | 9.8 | ||
| 64% | 6978 | 15.8 | 769.7 | 9.1 | ||
| 68% | 8009 | 19.6 | 957.6 | 8.4 | ||
| 72% | 9009 | 23.4 | 1144.1 | 7.9 | ||
| 76% | 9970 | 27.7 | 1350.8 | 7.4 | ||
| 80% | 10984 | 32.4 | 1579.1 | 7.0 | ||
| 84% | 12036 | 37.2 | 1812.5 | 6.6 | ||
| 87% | 12962 | 41.7 | 2031.8 | 6.4 | ||
| 94% | 14954 | 51.7 | 2520.3 | 5.9 | ||
| 100% | 16183 | 60.6 | 2944.2 | 5.5 |
Introduction
The X8 brushless power system is a power system capable of carrying a load of 5~7kg (per rotor) for agricultural drones. It can provide the thrust of up to 15.3kg and match 30/35mm carbon fiber tube arms. It’s waterproof an dustproof to IPX7 standard and resistant to rainwater, pesticides, salt spray, sand, dust, mud, sandy soil, high temperature and impact. It also features the algorithm used for optimizing the FOC ESC & Motor system and making the system more balanced, multiple protections like power-on self detection, power-on abnormal voltage, over-current and motor lock-up, and the real-time data output function.
Attention
• Always keep your dr one away from crowd, high-voltage power lines and obstacles, fly your drone in accordance with relevant safety regulations.
• Never get close to the high-speed r otating propeller & motor, otherwise you may get hurt.
• Check if all the parts ar e in good condition befor e use. If there exists any damaged part, please contact the factory for replacement.
• Check if any scr ew for connecting the parts is loose and the motors ar e horizontal before each flight.
• The bore diameter of the arm for the X8 power system is 35mm, if you w ant to use the 30mm tube, then install the tube adapter (included in the product box) into the pr ojecting tube on the motor mount first.
• You can change the light color of the LED set. In that case, you need to disassemble the light cover and slide the DIP switches accordingly.
• You can rinse the motor with fr esh water after each flight to keep it clean.
Specifications
| Max. Thrust | 15.3kg/Axis (48V, Sea Level) | Recommended LiPo Battery | 12S LiPo |
| Recommended Takeoff Weight | 5-7kg/Axis(48V,Sea Level) | Combo Weight | 1040g |
| Waterproof Rating | IPX7 | Operating Temperature | -20℃~50℃ |
Motor
| Stator Size | 81*20mm |
| KV Rating | 100KV |
| O.D of Carbon Fiber Tube | φ30mm/φ28mm (*Tube Adapter will be Needed) |
| Bearing | NSK ball bearing (waterproof) |
ESC
| Recommended LiPo Battery | 6-12S LiPo | PWM Input Signal Level | 3.3v/5v |
| Throttle Signal Frequency | 50-500Hz | Operating Pulse Width | 1100~1940μs Fixed or can't be programmed |
| Max. Input Voltage | 52.2V | Max. Input Current | 80 A |
| BEC | Built in | Max. Peak Current | 100 A |
| Nozzle Mounting Holes | φ28.4mm-2*M3 | ||
Propeller
Diameter×Pitch 3090
Weight 180g
Installation of the Power System
• The whole power system has been assembled befor e leaving the factory, it’s ready-to-use and you can directly mount it on your agricultural drone as per the rotation direction (CW/CCW) marked on the motor.
• The bore diameter (of the arm) is 35mm, if you want to use the 30mm tu be, then tube adapter will be needed.
• The (Black/Red/White) tri-color cable is for outputting data & updating ESC firmware, the (White/Black) bi-color cable is the throttle signal cable, and the yellow wire is the RPM signal output wire.
• The data signal wir e is for outputting thr ottle input, throttle output, motor RPM, input current, output current, input voltage, capacitor temperature, MOS temperature, and etc.
• The throttle range of the ESC is fixed at 1100~1940μs.